Prediction of cytotoxicity of heavy metals adsorbed on nano-TiO₂ with periodic table descriptors using machine learning approaches

• Joyita Roy,
• Souvik Pore and
• Kunal Roy

Beilstein J. Nanotechnol. 2023, 14, 939–950, doi:10.3762/bjnano.14.77

• derivatives [15], 51 manufactured nanoparticles with varying core metals, coatings, and surface attachments [16], and 80 surface-modified multiwall carbon nanotubes have been reported. Another approach, namely nano-read-across (nano-RA) [17], has been used to determine the cytotoxicity of unknown

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

Assessment of the optical and electrical properties of light-emitting diodes containing carbon-based nanostructures and plasmonic nanoparticles: a review

• Keshav Nagpal,
• Erwan Rauwel,
• Frédérique Ducroquet and
• Protima Rauwel

Beilstein J. Nanotechnol. 2021, 12, 1078–1092, doi:10.3762/bjnano.12.80

• market as they suffer from energy losses due to total internal reflection at the emitter/air interface. Several methods have been proposed to tune the properties of LED. To that end, multiwall carbon nanotubes (MWNT) and single-wall carbon nanotubes (SWNT) have been applied to various layers in LED, such

Free and partially encapsulated manganese ferrite nanoparticles in multiwall carbon nanotubes

• Saja Al-Khabouri,
• Salim Al-Harthi,
• Toru Maekawa,
• Mohamed E. Elzain,
• Ashraf Al-Hinai,
• Ahmed D. Al-Rawas,
• Abbsher M. Gismelseed,
• Ali A. Yousif and
• Myo Tay Zar Myint

Beilstein J. Nanotechnol. 2020, 11, 1891–1904, doi:10.3762/bjnano.11.170

• manganese ferrite nanoparticles inside the tubes is observed as a shift in the X-ray diffraction peaks and as an increase in stress, hyperfine field, and coercivity when compared to free manganese ferrite nanoparticles. On the other hand, a strong charge transfer from the multiwall carbon nanotubes is

• removal of harmful pollutants [8], carbon nanotubes decorated with molybdenum disulfide are used in microbial fuel cells [9] and photoelectric detectors [10], supercapacitor electrodes use binary metal oxide/multiwall carbon nanotubes (MWCNTs) [11], among other numerous recently developed applications [12

• nanoparticles are characterized by the superparamagnetic behavior. Partially encapsulated manganese ferrite nanoparticles inside multiwall carbon nanotubes The formation of MnFe2O4 nanoparticles inside the inner cavity of MWCNTs and outside of MWCNTs is confirmed by chemical mapping using EDS–STEM (Figure 4

Towards 3D self-assembled rolled multiwall carbon nanotube structures by spontaneous peel off

• Jonathan Quinson

Beilstein J. Nanotechnol. 2020, 11, 1865–1872, doi:10.3762/bjnano.11.168

• ; multiwall carbon nanotubes; nitrogen doping; peel off; rolled carbon nanotubes; Introduction Carbon nanotubes (CNTs) are popular materials used in various applications [1]. These tubular hollow carbon nanomaterials have proven to be useful in multiple scientific fields [2][3][4][5][6]. Complex structures

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

• Matías Guerrero Correa,
• Fernanda B. Martínez,
• Cristian Patiño Vidal,
• Camilo Streitt,
• Juan Escrig and
• Carol Lopez de Dicastillo

Beilstein J. Nanotechnol. 2020, 11, 1450–1469, doi:10.3762/bjnano.11.129

Photothermally active nanoparticles as a promising tool for eliminating bacteria and biofilms

• Mykola Borzenkov,
• Piersandro Pallavicini,
• Angelo Taglietti,
• Laura D’Alfonso,
• Maddalena Collini and
• Giuseppe Chirico

Beilstein J. Nanotechnol. 2020, 11, 1134–1146, doi:10.3762/bjnano.11.98

• ]. Therefore, carbon nanotubes also have potential to be used in the NIR-triggered photothermal bacterial treatment. It was shown that multiwall carbon nanotubes functionalized with antibodies against the group A Streptococcus bacteria were capable of photothermally ablating the planktonic and biofilm-residing

• bacteria upon 800 nm laser exposure (1.3 W/cm2) for 10–120 s [87]. The authors also found that, upon NIR irradiation, the antibody-labelled nanotubes displayed an enhanced antibacterial action on both planktonic cells and biofilms when compared to carboxylated multiwall carbon nanotubes. The use of carbon

Multiwalled carbon nanotube based aromatic volatile organic compound sensor: sensitivity enhancement through 1-hexadecanethiol functionalisation

• Nadra Bohli,
• Meryem Belkilani,
• Juan Casanova-Chafer,
• Eduard Llobet and
• Adnane Abdelghani

Beilstein J. Nanotechnol. 2019, 10, 2364–2373, doi:10.3762/bjnano.10.227

• temperature toluene and benzene sensor based on multiwall carbon nanotubes (MWCNTs) decorated with gold nanoparticles and functionalised with a long-chain thiol self-assembled monolayer, 1-hexadecanethiol (HDT). High-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared

• sensitivity (up to 17 times), selectivity and improves the response dynamics of the sensors. Keywords: gold-decorated MWCNTs; multiwall carbon nanotubes (MWCNTs); self-assembled monolayers (SAMs); sensitivity; selectivity; vapour sensor; Introduction Aromatic volatile organic compounds (VOCs) such as

• , metal decoration or chemical functionalisation [13]. In the present work, we investigated the effect of gold nanoparticle decorated, multiwall carbon nanotubes functionalized with 1-hexadecanethiol on the sensor selectivity and sensitivity towards benzene and toluene vapours. Experimental Materials

Hydrophilicity and carbon chain length effects on the gas sensing properties of chemoresistive, self-assembled monolayer carbon nanotube sensors

• Juan Casanova-Cháfer,
• Carla Bittencourt and
• Eduard Llobet

Beilstein J. Nanotechnol. 2019, 10, 565–577, doi:10.3762/bjnano.10.58

• , Belgium 10.3762/bjnano.10.58 Abstract Here we describe the development of chemoresistive sensors employing oxygen-plasma-treated, Au-decorated multiwall carbon nanotubes (MWCNTs) functionalized with self-assembled monolayers (SAMs) of thiols. For the first time, the effects of the length of the carbon

• response and selectivity. This would make the detection of polar and nonpolar gas species employing low-power gas sensors easier, even under fluctuating ambient moisture conditions. Keywords: carbon length chain; gas sensing mechanism; hydrophilicity; hydrophobicity; multiwall carbon nanotubes (MWCNTs

• . Experimental Functionalization of carbon nanotubes Multiwall carbon nanotubes (MWCNTs) functionalized with carboxylic acid (COOH) were purchased from Nanocyl S.A. (Belgium). These nanotubes were produced by a catalytic chemical vapor deposition (c-CVD method) and purified to greater than 95%. The average

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

• results in the formation of oxygen-containing groups (OH, C=O and COOH) on the surface of the CNTs. The amount of oxygen-containing groups formed depends on the treatment method used. The chemical modification of the surface of (MWCNTs) multiwall carbon nanotubes is required via the oxygenated functional

Photo-ignition process of multiwall carbon nanotubes and ferrocene by continuous wave Xe lamp illumination

• Paolo Visconti,
• Patrizio Primiceri,
• Daniele Longo,
• Luciano Strafella,
• Paolo Carlucci,
• Mauro Lomascolo,
• Arianna Cretì and
• Giuseppe Mele

Beilstein J. Nanotechnol. 2017, 8, 134–144, doi:10.3762/bjnano.8.14

• characteristic of the MWCNTs. The results reported in [4] for SWCNTs have been confirmed also for multiwall carbon nanotubes (MWCNTs) in [5]. In fact, in this research work, the MWCNTs showed the same stabilizing behavior as the metal particles dispersed within them. Assuming the role of metallic additives

Photocurrent generation in carbon nanotube/cubic-phase HfO₂ nanoparticle hybrid nanocomposites

• Protima Rauwel,
• Augustinas Galeckas,
• Martin Salumaa,
• Frédérique Ducroquet and
• Erwan Rauwel

Beilstein J. Nanotechnol. 2016, 7, 1075–1085, doi:10.3762/bjnano.7.101

• , Puiestee 78, 51008 Tartu, Estonia, IMEP-LAHC, CNRS, Université de Grenoble-Alpes, Minatec campus, 38016 Grenoble, France 10.3762/bjnano.7.101 Abstract A hybrid material consisting of nonfunctionalized multiwall carbon nanotubes (MWCNTs) and cubic-phase HfO2 nanoparticles (NPs) with an average diameter of

Synthesis and applications of carbon nanomaterials for energy generation and storage

• Marco Notarianni,
• Jinzhang Liu,
• Kristy Vernon and
• Nunzio Motta

Beilstein J. Nanotechnol. 2016, 7, 149–196, doi:10.3762/bjnano.7.17

• applications. CNTs are categorized as single-walled carbon nanotubes (SWNTs) and multiwall carbon nanotubes (MWNTs). SWNTs are single graphene sheets rolled up to form a tube, while the MWNTs consist of multiple rolled layers (concentric tubes) of graphene (Figure 9) [43]. The manner in which the graphene

Observation of a photoinduced, resonant tunneling effect in a carbon nanotube–silicon heterojunction

• Carla Aramo,
• Antonio Ambrosio,
• Michelangelo Ambrosio,
• Maurizio Boscardin,
• Paola Castrucci,
• Michele Crivellari,
• Marco Cilmo,
• Maurizio De Crescenzi,
• Francesco De Nicola,
• Emanuele Fiandrini,
• Valentina Grossi,
• Pasqualino Maddalena,
• Maurizio Passacantando,
• Sandro Santucci,
• Manuela Scarselli and
• Antonio Valentini

Beilstein J. Nanotechnol. 2015, 6, 704–710, doi:10.3762/bjnano.6.71

• obtained by growing a continuous layer of multiwall carbon nanotubes on an n-doped silicon substrate. The multiwall carbon nanostructures were grown by a chemical vapor deposition (CVD) technique on a 60 nm thick, silicon nitride layer, deposited on an n-type Si substrate. The heterojunction

• low, intrinsic dark current and noise. Keywords: heterojunction; multiwall carbon nanotubes; NDR; photodetector; tunneling; Introduction Negative differential resistance (NDR), where the current decreases as a function of voltage, has been observed in the current–voltage curves of several types of

• tunneling current is generated by the incident radiation and it is function of the wavelength and the incident power intensity. Experimental In a similar manner to that described [13], the photodevice was realized by growing a film of multiwall carbon nanotubes (MWCNTs) on an n-doped silicon substrate. The

In vitro interaction of colloidal nanoparticles with mammalian cells: What have we learned thus far?

• Moritz Nazarenus,
• Qian Zhang,
• Mahmoud G. Soliman,
• Pablo del Pino,
• Beatriz Pelaz,
• Susana Carregal-Romero,
• Joanna Rejman,
• Barbara Rothen-Rutishauser,
• Martin J. D. Clift,
• Reinhard Zellner,
• G. Ulrich Nienhaus,
• James B. Delehanty,
• Igor L. Medintz and
• Wolfgang J. Parak

Beilstein J. Nanotechnol. 2014, 5, 1477–1490, doi:10.3762/bjnano.5.161

• , proteins which are initially bound to the NP surface can later be replaced by others [140][141], which also is referred to as the Vroman effect [142]. It has been shown, for example, that surfactant lipids bound on multiwall carbon nanotubes are replaced with blood plasma proteins after a subsequent

Influence of particle size and fluorination ratio of CF_x precursor compounds on the electrochemical performance of C–FeF₂ nanocomposites for reversible lithium storage

• Ben Breitung,
• M. Anji Reddy,
• Venkata Sai Kiran Chakravadhanula,
• Michael Engel,
• Christian Kübel,
• Annie K. Powell,
• Horst Hahn and
• Maximilian Fichtner

Beilstein J. Nanotechnol. 2013, 4, 705–713, doi:10.3762/bjnano.4.80

• metal nanoparticles encapsulated in layers of graphitic carbon were formed. The agglomerates are interlinked by multiwall carbon nanotubes which are formed in situ [34][35][36]. Although these systems enhanced the cycling stability of the conversion reaction greatly because of the tight embedding of

Low-temperature synthesis of carbon nanotubes on indium tin oxide electrodes for organic solar cells

• Andrea Capasso,
• Luigi Salamandra,
• Aldo Di Carlo,
• John M. Bell and
• Nunzio Motta

Beilstein J. Nanotechnol. 2012, 3, 524–532, doi:10.3762/bjnano.3.60

• , University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome, Italy 10.3762/bjnano.3.60 Abstract The electrical performance of indium tin oxide (ITO) coated glass was improved by including a controlled layer of carbon nanotubes directly on top of the ITO film. Multiwall carbon nanotubes (MWCNTs) were